None 13431103002300 Use and Care Manual download pdf (Page 7)

7 HOMEDEPOT.COM/HOMEDECORATORS

Please contact 1-877-527-0313 for further assistance.

Assembly — Hanging the Fan

Attaching the mounting bracket to

the electrical box

□

Place the slots from mounting bracket (B) over the two

screws provided with the outlet box. Slide the mounting

bracket (B) until it locks in place at the narrow section

of the slots.

□

Securely tighten the two mounting screws.

WARNING: To reduce the risk of ﬁre, electric shock, or

other personal injury, mount the fan only to an outlet box or

supporting system marked acceptable for fan support and

use the mounting screws provided with the outlet box.

□

Loosen the two set screws (KK) from the fan motor

assembly (H) coupling.

□

Remove the hitch pin (HH) and lock pin (II) from the

downrod (F). Remove the hanger ball (E) from the

downrod (F) by loosening the hanger ball set screw (JJ),

and removing the cross pin (GG), then sliding the hanger

ball (E) off of the downrod (F).

□

Carefully feed the fan wires up through the downrod (F).

Thread the downrod (F) into the fan motor assembly (H)

coupling. Line up the holes and replace the lock pin (II)

and the hitch pin (HH). Tighten the set screws (KK).

Attaching the downrod to the

fan motor assembly

1 2 3 4 5 6 7 8 9 10 11 12 ... 18 19

No comments

None 13431103002300 Use and Care Manual Page 7